Continuous flow vermicomposters need an initial base layer during startup to act as a bedding until the layers of castings and feedstock in the bin build up over time. Peat moss and coco coir can both used for this base layer, but until recently peat has been far more common.

Peat’s porous micro-structure enables it to hold many times its own weight in water. It is dehydrated for sale but should be re-moistened before use.

Ironically, when peat moss is dry it is hydrophobic – it repels water!

Moisture beads up and rolls off, instead of quickly soaking in. The trick to wetting large quantities of peat moss is to add a surfactant or wetting agent to the water.

This reduces the water’s surface tension, allowing it flow more easily into the pores and spaces instead of forming droplets on the surface. It also makes the peat surface more ‘wettable’, meaning it is chemically more attracted to water. Commercial potting mixes have wetting agents added for this reason.

The wetting process is a bit like priming a pump or starting a siphon – once you get it started, it continues on its own.



Wetting Peat Moss to Prepare for Vermicomposting

You can make your own wetting solution by adding a little dish soap to water. Use just a few drops per gallon. Avoid making suds – first fill the container with water and then add the soap, stirring to mix well. Hot water works fastest, but cool water from the garden hose works too.

Use equal parts (by volume) of peat moss and liquid. A typical bale (3.0 cu.ft. or 85 liters) will take about 20 gallons of solution.

It’s easy to work with half-bale chunks.

  1. Leave the wrapper intact and cut the bale in half with a saw.
  2. Empty one half in a large tub and pour on 10 gallons of your wetting solution to submerge it.
  3. Break up the chunk a bit and work it around with a garden fork or spade.
  4. In a few minutes you’ll have moist peat moss ready to fluff and use!



The Science Behind Wetting Peat Moss

The surface of peat moss is very different, and its molecules are not attracted to water molecules.Water molecules are strongly attracted to each other. Microscopically, the surface tension of a droplet is stronger than most other forces acting on it.

When dry, the tips of the peat fibers tend to repel the spherical droplets. But peat is structured like a sponge with millions of tiny pores and spaces. When a little moisture does get into a pore, its strong attracting to itself draws in more moisture behind it, overcoming the repelling force of the dry fibers.

The wetting solution helps to speed up that process! Peat Moss is also a good carbon feedstock, just like paper. Read more about it here.